Rampage Rear Sport Rack

Ouch! We were told a 5-day chest or ARB fridge would fit…not so

DISCLAIMER: One of the things we pride ourselves on is HONEST feedback. It is purely based on our experience alone. I’ve lost sponsors and partnerships through honesty. My position is to give our audience what we feel are fair evaluations of gear we test. If it’s on my rig- I HIGHLY recommend it for yours.

 

We don’t usually dislike a product so quickly on this level. We are careful to select products from several weeks if not months of research. We make it a habit to talk to other users, check out the blogs, and even speak to sales or customer service reps about the product before we pull the trigger and throw it on the rig, put it in a pack, or try it on the trail.

 

With that said, we were finding little about the Rampage Products Rear Interior Sport Rack. We were looking for a way to better organize our gear in the back cargo area of our 2013 JK. The plan was to keep our 5-day ice chest under the rack along with other bulky items such as tool kit, chuck box, and Scepter 5-gallon water jug. We looked for details and dimensions from sellers, distributors and even the manufacturer. When we inquired a rep about it and relayed our expectations the response was, “Shouldn’t be a problem.”

Even one of my smaller chest would not fit. I don’t know of any Jeepers that don’t throw some kind of cooler in the back for suds and grub…

It was a problem. I have four ice chests and not a single one could go under the rack. Even when we put the rack into the upright position, then the ice chest could not fit in length-wise. Space wasted…
For someone who isn’t toting an ice chest and simply need a better way to organize sports gear, groceries, etc it’s a good concept. The storage rack features a fairly sturdy steel tray that mounts in the rear cargo area. Putting it together wasn’t that difficult and I did it in about an hour with no drilling required. One of the things that made it slightly difficult with my soft-top and impossible on a hard top is the tubular brackets that go on the roll bar.The Allen bolts faced outward and I had to remove the rear window on each side to get to the bolts.

The concept is awesome and installation was super easy…just a little more thought around design and beefing up some of the movable parts and this rack would be on the top of our “buy-it” list

The concept of moving the tray out-of-the-way when not in use is unique in this model. On the bottom of the tray are two spring clips and a single gas strut allowing the rack to tilt forward providing easy access to gear located underneath. One problem though is the hooks don’t fully engage and a simple run around the block after installation and several attempts to adjust proved to be a waste of time. The thin bar at the bottom would create an annoying rattling on dirt roads.
I had even thought about the possibility of placing the ice chest on top of the rack and quickly dismissed the idea when I realized I would have five days of food and drinks rocketing towards all passengers in the case of an abrupt stop. The only bolt-down points are on the roll bars and it does not tie into the body or the frame at any other point.
If this was for a grocery-getter or soccer mom Jeep I wouldn’t hesitate to put it in. It does help to organize suburban adventures on Saturday morning and payday grocery runs. It does provide a bit of security and for photographers wanting to store gear out of sight it could be a benefit.
We paid $240 for our set up and thankfully the company we ordered from is going to allow us to send it back based upon the product not meeting the expectations we outlined.

Again, the concept is great, and other gear we have from Rampage has fared very well to excellent. The major disappointment here is based on the initial expectations not being met. Show me a Jeep guy that at some point doesn’t throw an ice chest full of grub and suds in his rig for a few days of fun on the trails.

 

Teraflex Tailgate Table

The Teraflex Tailgate Table has been on my wish list since I saw Roger Mercier of Overland Frontier fixing breakfast at the Overland Expo using a drop table like this. This is the perfect accessory for any Jeep enthusiast needing a spot to make a quick sandwich, poor a glass of wine for your “glamping” companions, or even repair an RC car on. I used mine for a cooking surface for my two-burner stove, however I’m not sure I can recommend this due to the proximity of grease, fire, gas cans, and the rest of my rig. For everything else kitchen related, it is perfect!

Carl using a hose clamp to prevent the bit drilling too far

The install took about 45 minutes. For the most part it is simply placing the pattern on the inside of the tailgate and DETAILED drilling. On my 2013 JK I had to ensure that we didn’t hit any of the spot welds and also be conscious of the degrees of metal thickness. The right side of the tailgate has more sheet metal than the left. Also our drill spot on the lower left was half thin and half double metal. This caused the drill bit to walk a bit and tried to “egg” the hole instead of a neat circle. Fortunately I had Carl helping me and being the master of machinery he is, immediately detected the problem. He finished out the last hole using a die-grinder at low-speed.

You should also be aware that if not careful- your drill bit can punch through the inside wall and leave a dent in the exterior wall. Teraflex has a highly informative video out there demonstrating how they did the install and specifically point this out. Recommend you check out their video as well. We didn’t have a tool to prevent the bit from going through- so we used a hose clamp around the bit. Worked like a charm!

We had to pre-crimp some of the Zert nuts to get them to grab traction on the tailgate

One issue we found on the thinner part of the tailgate wall was the Zert nuts getting enough traction to mushroom out. Zert nuts are similar to a rivet, except once installed they will accept a bolt or screw to hold an item in place. We pre-crimped the nuts so they would grab traction on the thinner part of the wall. If you do this—it is a VERY MINOR crimp. Try installing per instructions first.

Once the nuts were in, it was just a matter of bolting the table onto the four nuts, doing some minor adjustments to the cable, and then off to make a sandwich.

Teraflex does have a cutting board available and I recommend ordering your multi-purpose table with one. I’m watching every dime right now to get ready for our Oregon/Washington/Canada trip and Washington Overland Rally trip and even though they are not expensive, I opted to not to get one and use our cutting board out of the trailer. Wishing I had bought one now and after the rally will put that on my “to-buy” list.

The rack will hold a stove and as mentioned above but for me,  I’m not keen on this idea. My first real meal came Sunday afternoon in the mining country of the Boise Mountains. I was making Tri-tip burritos using my two-burner stove and cast iron. My stove is a bit odd in the way it set up with portable propane bottles, and I wasn’t comfortable with the way it sat on the rack. Not the fault of the rack, I have an odd-set up is all. Tri-tip does have a moderate level of fat on the underside. While testing I had a small grease fire and even though nothing was damaged, looking back, with fire in close proximity to my Trasharoo and Rotopax gas can, I think I will move the stove to a safer location.

In my second testing along the Snake River on Monday, the table was perfect for dicing tomatoes and cutting lettuce for my special back-country finger sandwiches and wedge salad. It also made a great platform in the evening as I was conducting a wine tasting complete with assortments of cheese. No I have not lost the rugged edge; I was simply providing my wife and sister-in-law with a weekend of back-country luxury.

The well entertained ladies in the back country– Good lunch, warm fire, and me performing survival tricks!

The Tailgate Table allowed me to prep all kinds of snacks and meals for these ladies in the back country…including a wine tasting! Now I just need a rack and awning for some shade!

This is a well thought-out product and a must have for any Jeeper. Contact Teraflex.com or Quadratec.com to order yours!