As many of you know—I have been burned (no pun intended) by survival products I have purchased in the past. Sometimes the concept is great, works well in the lab, works well in limited field testing, fails when you really need it.
I am also conscious of where I spend my hard-earned dollars. Sometimes though I have to be aware that there are guys out there that may not have the same experience as me, so I have to think about the guy or gal who is new to the woods, is cold in the woods, or the person who pulls up to a camp site and has to get it quickly situated.
Okay, enough of the prelude, let me tell you about a product we strongly endorse… Firepuck.
This is by far one of the coolest things (there is that pun thing again) we have tested in a long time. I can start fires with everything from shotgun shells to belly button lint. If you have been to one of my seminars we do just that. I will still carry a couple of these. This is a great way to get a fire started whether you are a survival expert or the guy who has to start the fire pit in the backyard.
Starting with the stats, this thing burns at 1400 degrees. To get a fire going you need oxygen, fuel, and heat. If your fuel source is wet it is going to be difficult to light. Put yourself in a situation where you are hypothermic and all sources are wet, you are in deep trouble if you can’t get a fire going. I won’t matter how many cotton balls you can light with flint and steel, wet fuel source means trouble. The advantage of the hot temps produced by the Firepuck is that not only does it provide quick ignition of your fuel source, it actually dries your source.
For our test I soaked seasoned pine in a 5 gallon bucket for approximately 60 hours. (I had intended to do it for only 48 hours, but got side- tracked so the wood stayed submerged and extra day.) I then used a modified Tee-Pee build for the fire with no other kindling. Please check out the video for more perspective.
The Firepuck is easy to use. It has a friction based ignition system integrated into the cap. It took me three attempts in the video to light it…this is because I was a pansy and was over-cautious. In reality, like all of you laughing at my failure in the video. I was impressed with how concentrated the flame source was, a feature you want in high wind conditions. Unlike all those cotton balls I fill with petroleum jelly, this product is petroleum free.
One of the points made about the product is that it is not water proof. Honestly, there are not a lot of products that are truly waterproof that are this easy to use when it comes to fire starting. This can be made water proof though by using either a Mylar bag also sold by Firepuck or a Zipper style baggie. I am currently testing one in a zipper baggie with two small moisture tabs (designed to pull moisture out) and will test that next week. They are sitting in a backpack in the downpour we have been receiving off-and-on the past few days. They show no signs of taking on moisture at all.
What I like about this product is that you don’t have to be an expert to use it. It takes the guess-work out of staying alive. I would ensure that I don’t use it at the back end of my jeep, in doors as a gag, or substitute it for birthday candles. I also like that it does not leave residue like a road flare would, and for the same size of a flare, I can carry six of these.
I will be carrying these in my EMT/ Wilderness Rescue bag, survival bag, and in my vehicles. If you buy anything new to go into your survival or camping kit, this should be first on the list. I would also include this on a list of something to keep on hand for those back yard parties where you have a firepit. This is a no hassle way to get a fire going for your guest.
Be sure to check out Firepuck at their website for more info.